当前位置: 产品列表 产品详情
< >

0.69英寸 96×16 OLED显示屏 SSD1306BZ集成电路,接口I2C,14PIN

SCE069001-V01是一款COG类型的OLED显示屏,96×16分辨率,SSD1306BZ集成电路,接口I2C,14PIN

  • Type: OLED
  • Mode: -
  • Product No: SCE069001-V01
  • Size: 0.69''
  • Resolution: 96×16
  • Outline Dimension: 26.3*8*1.227
  • Active Area: 17.26*3.18
  • Interface: I2C
  • IC: SSD1306BZ
  • Brightness: -
  • Touch Screen: No
  • View Direction: -
  • Pin No: 14
  • Shape: 长方形
立即询价

介绍:

 General Specification

 

ITEMSPECIFICATIONS UNIT
  MODULE SIZE26.3(W)x8.0(H)x1.227(D)mm
  VIEWING AREA18.86 (W) x 4.78(H)mm
  ACTIVE AREA17.26 (W) x3.18(H)mm
  DOT SIZE0.16(W) x0.18(H)mm
  DOT PITCH0.18(W) x0.20 (H)mm
  ASSY.TYPECOG
  WEIGHTTBD

Interface Definition

 

PIN NO.SYMBOLTYPEFUNCTION DESCRIPTIONS
1C2P
C1P/C1N-Pin for charge pump capacitor. C2P/C2N-Pin for charge pump capacitor.
2C2N
Connect to each other with a capacitor. They must be floated when the
3C1PICharge pump not use.
4C1N

5VDDBPPower supply for charge pump regulator circuit.
It must be connected to external source when charge pump is used. It must be float when charge pump is not used.
6NCIReserved pin. It should be kept NC.
7VSSPGround pin. It must be connected to external ground.
8VDDPPower pin for logic circuit. It must be connected to external source.
9RES#IHardware reset input pin. Active “L”.
10SCLII2C interface clock wire
11SDAII2C interface data wire
12IREFICurrent reference for brightness adjustment.
This is segment output current reference pin. A resistor should be connected between this pin and VSS .Set the current at 12.5 uA maximum.
13VCOMHOCOM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
14VCCPPower supply for OLED driving voltage. A capacitor should be connected between this pin and VSS, when charge pump is used.
It must be connected to external source when charge pump is not used.


上一页 上一个产品 : 0.66英寸 64×48 OLED液晶屏 SSD1306BZ芯片6800/8080接口 4线串行接口I2C,30PIN

下一个产品 : 0.87” 128×32 SPI OLED 显示屏 SSD1306Z IC,4线SPI接口,15PIN 下一页