当前位置: 产品列表 产品详情
< >

12864单色图形显示器,COG ,STN ,Y-G , ST7565R IC ,36 PIN

SC12864032-V02是一个分辨率为128*64的图形液晶显示器,配备了IC ST7565R-G-1,36PIN,6点钟的观察方向。

  • Type: 单色图形
  • Mode: STN/Y-G
  • Product No: SC12864032-V02
  • Size: -
  • Resolution: 128*64
  • Outline Dimension: 71.0*51.8*5.3
  • Active Area: 65.5*38.0
  • Interface: -
  • IC: ST7565R
  • Brightness: -
  • Touch Screen: No
  • View Direction: 6
  • Pin No: 36
  • Shape: 长方形
立即询价

介绍:

General Specification

 

ITEMSTANDARD VALUEUNIT
 NUMBER OF GRAPHIC128×64Mm
 MODULE DIMENSION71.0×51.8×8.5Mm
 VIEWING AREA60.77×32.93Mm
 DOT SIZE0.45×0.49Mm
 DOT PITCH0.476×0.515Mm
 LCD TYPESTN/YELLOW-GREEN/POSITIVE/TRANSMISSIVE
 DUTY1/64
 VIEWING DIRECTION6o’clock
 BACK LIGHT TYPESIDE LIT LED
 BACK LIGHT COLORWHITE
 APPROX. WEIGHTTBDG

 

  Interface Definition

 

NOSYMBOLLEVELFUNCTION
1–2NCNo used
3CS1H/LChip select signal
4RSTH/LChip reset signal
5A0H/LRegister selection input
H : Indicate that D0 to D7 are display data.
L:Indicate that D0 to D7 are control data
6WR(R/W)H/L8080 series: Write signal
6800 series: Read or Write signal
7RD(E)H/L8080 series: Read signal
6800 series: Enable signal
8–15

This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus.
When the serial interface (SPI-4) is selected (P/S = “L”) : D7 : serial data input (SI) ;
D6 : the serial clock input (SCL).
D0 to D5 should be connected to VDD or floating.
16VDDSupply voltage for logic
17VSSGround
18VOUTPower for LCD
19C3+DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1N terminal.
20C1-DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1P terminal.
21C1+DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP1N terminal. Reset signal.
22C2+DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP2N terminal.
23C2-DC/DC voltage converter. Connect a capacitor between this
terminal and the CAP2P terminal. Chip select.
24NCNo used
25-29V4-V0This is a multi-level power supply for the liquid crystal drive.
30VRContrast adjustment input.
31NCNo used
32C86H/LC86 = “H”: 6800 Series MPU interface.
C86 = “L”: 8080 Series MPU interface.
33PSH/LP/S = “H”: Parallel interface
P/S = “L”: Serial interface
34NCNo used
35IRSH/LRS = “H”: Use the internal resistors
IRS = “L”: Do not use the internal resistors.
36NCNo used


上一页 上一个产品 : 12864分辨率的单色图形液晶屏, COG, ST7565R IC, 白色LED, 30 PIN

下一个产品 : 128128单色图形显示器,2.2英寸COG ,FSTN, ST7571-G4C IC, 30 PIN 下一页